Announcing the Relaunch of Mirinsoft and Born of iMirin

Arrow up
Arrow down


Visitor today 423 | Yesterday 1499

Currently are 55 guests and no members online



Support the Development

All Posts

113 posts found

19 March 2019, 16:07

Hi, Belim.

Thank you for the message.  I was able to get Cleanmgr+ to calculate the "space to gain" for those +more items.  ;-)

As you know, this probably isn't intuitive or easy to figure out.  What you have currently works, but I wouldn't necessarily expect most users to figure out how to have Cleanmgr+ calculate the "space to gain" for the +more items.

For the items under the Disk Cleanup tab, the "space to gain" is calculated automatically if you click on the ____ link after gain >.  So, it makes sense that if you go to the +more tab and click the ____ link after gain >, then Cleanmgr+ would calculate the "space to gain" for the +more items.

Also, if "space to gain" has been calculated for the Disk Cleanup tab or the +more items already while Cleanmgr+ is open, then it would be nice if those results were remembered despite switching between the Disk Cleanup tab and the +more tab.  Currently, I can calculate "space to gain" for the Disk Cleanup tab and then for the +more items, but then if I go back to the Disk Cleanup tab, the "space to gain" results are gone and I have to calculate them again. 

Some users might leave Cleanmgr+ open for an hour or two or even longer.  In those cases, perhaps the "space to gain" results should be re-calculated.  However, it would be nice if the results were remembered for each tab for at least for a few minutes or until the ____ link after gain > is clicked again.  If you update Cleanmgr+ so that the +more items can also be calculated manually using the ____ link after gain >, then it would be no big deal for a user to re-calcuate "space to gain" for the Disk Cleanup or +more items if they wanted to.  But, the user might prefer the results to be remembered if/when switching between tabs.

Thank you for all of your work and effort on Cleanmgr+.  ;-)


+1 Share Comment
19 March 2019, 13:37

Hi, Belim.

In the release notes for v1.0.3.249, you mention: 

"Added function to calculate the "space to gain" in "+more/Scripts" tab (this is optional and the space is automatically calculated after hitting the "+more" tab)"

I don't see how to enable this optional function.  I would like to test it.


0 Share Comment
Belim (Admin)
19 March 2019, 14:39

Hello 0.MRG,

Yes that's true :) Just switch to the +more tab and the calculation runs automatically. Of course, you must have previously pre-check some clean-up items. I would recommend using the "Check installed scripts" function in the main menu > "+"

Cleanmgr+ will report in the status label something like "You can free up + more xxx MB of disk space by cleaning up these items" To refresh the calculation just hit the "+ more" tab again.

I hope I have now a slightly happier user :)

Have a good day

16 March 2019, 14:58

The script to give access to taking ownership of the windows.old files is not working. It runs and says access denied. As such, the directory is not removed. 

0 Share Comment
Belim (Admin)
19 March 2019, 14:30

Please try the latest Build and logon as Administrator. Thanks!

10 March 2019, 18:09

CloneApp spawns a reg.exe process for each registry item it backs up, along with a corresponding conhost.exe process, but it doesn't close these processes upon successful completion of the backups. I haven't tested what happens if CloneApp is run more than once in succession. System: Windows 7 SP1 x64.

0 Share Comment
26 April 2019, 00:58

Were you able to reproduce the problem? You should be able to see it in Task Manager, or using tasklist in a cmd shell.

22 March 2019, 00:48

To answer your question: AFAICT, yes, it appears to spawn one reg.exe process for each backup job. But you can verify this yourself by running CloneApp on your own system - you should observe the same behavior.

Belim (Admin)
19 March 2019, 14:32

Hi Rhodes,

i will take a look into this. How many reg.exe processes did you observe? For each Backup job a seperate one?

09 March 2019, 08:54

Trojan.GenericKD.41079484 is reported from Biddefender for Cleanmgr. 

0 Share Comment
Belim (Admin)
09 March 2019, 09:34

this is a false positive. It would be a great if you could report this to Bitdefender.

Windows Smartscreen, Google Chrome and some other antivirus engines may warn you from downloading this program. This is caused to the small user base. Sadly I can't change anything about that. Cleanmgr+ is five weeks old :)

Many thanks.

07 March 2019, 00:04

Deleting Windows.old issue 

Every time I run Cleaner+ it launches into deleting Windows.old, taking ages to remove hundreds of files again. How is this possible? Does it mean that the files are not being deleted at all, despite being reported as deleted What is going on?

0 Share Comment
Belim (Admin)
09 March 2019, 09:39


Cleanmgr+ shows a command prompt to trace the progress. You are right. This takes sometimes a while and more. So, the files are being reported as deleted? The Windows.old directory does not count fewer files? Have you tried deleting it with classic Cleanmgr.exe (from Microsoft) ? If this is completed successfully, i will have to take further look. Please let me know.


Van Holton
06 March 2019, 22:15

I need to backup all my Office 2016 settings (which I have done) and restore to Office 2019.  Especially the Word AutoText and AutoCorrect settings. Cloneapp does not seem to do this.  Can anyone help?

0 Share Comment
ammar mufti
06 March 2019, 09:16

Hello All,

I am having trouble transferring the settings of the Excel settings and macro i have created on my computer. everythig goes smooth and it tells me that the transfer was succesful but the excel doesnt change anything

0 Share Comment
27 February 2019, 19:34

Hello Belim,

Take a look to my PDF to know what I mean !

Best regards

0 Share Comment
Belim (Admin)
09 March 2019, 10:06

Hi Greenwild,

many thanks for the Info.
I will take a close look and get back to you!

Best regards from Germany

24 February 2019, 20:36

Hi Belim,

I want to say that you do a great job with your
softwares and if you are interested I have updated the french
localization for the latest version of CloneApp.
the string "mnuLocalizationImport=" in Hamburger menu didn't work with
any localization (German locale too) but only in english so is it
possible to correct this bug !
Is it possible too in a next release to support Unicode UTF-8 for some french lettering and other locales !

Thank you !

French localization update
+1 Share Comment
Belim (Admin)
26 February 2019, 12:13

Hello Greenwild,

thank you very much for your kind words and support :)
I've updated and replaced the old localization file with your version.
Here is the link

I've tested the String "mnuLocalizationImport=" and it does function.
But there is also a second "mnuLocalizationRemove" String for removing the localization file, if its already imported. Did you mean this one?

Unfortunately, i can't bring unicode support currently. This would mean extensive modifications of some used controlls and i dont' have the resources for it.

Best regards,

My Account

Other languages